Whether your stock end links bushings are worn out or you are looking for a longer end link for your lifted ZR2 these end links are the perfect solution!
- Extended length
- 1" Longer than OEM ZR2
- 2" Longer than OEM Std. Colorado
- Billet aluminum machined endlink center
- Grade 8 Hardware
- Polyurethane bushings
- Pair of endlinks
- 2017+ Chevrolet Colorado ZR2
- Note: This will fit standard Colorado but is to only be used in special applications, this will be too long for most standard Colorados
My 2022 ZR2 had the front end clunk noise in colder temps. It got progressively worse after a 1” level kit. Finally after much reading tried these level up sway bar links and the noise is gone.
These are made really well with a great finish and an easy install. Fast shipping and good packaging. Can't ask for more!
These sway bar end links are super easy to install. They look great and better yet they make the drivability much better than the stock ones do with the Kings coil-overs and a front level.
Excellent and necessary product if you level your truck! Low speed clunk be gone!
These solve another “clunking” point on these trucks. The factory endlink bushings shrink and get hard along with the split pin spacer spreading apart. You can’t tighten the factory endlink any further and you’re stuck with the clunk. These endlinks from LevelUp fix all those issues, have easy to replace bushings and look rad. One note on install, the aluminum spacer is raw inside. I recommend coating the bolt with some grease to prevent any galvanic corrosion from starting.